Sealing Leaks on a Wet Roof Panels
Roofing
Step 1: Preparation
- Remove as much dirt and dust as possible with the soft brush.
Step Two: Fixing
- With the trowel or filling knife apply a generous amount of ROOF7 to the substrate.
- Press down on the flashing.
Step 3: Finishing
- Wipe off excess ROOF7 with a paintbrush which is moistened with TEC7 Cleaner.
- Remove excess ROOF7 immediately withMAGIC CLEAN7 Tissues.
- Clean tools with TEC7 Cleaner.
