![tec7-how-to-pur7](https://tec7.ie/wp-content/uploads/2020/11/tec7-how-to-pur7.png)
HOW TO MOUNT SKIRTING BOARDS
Products Required.
STEP
2
Preparation
- Remove loose particles and dust with brush and/or vacuum cleaner.
- Moisten the substrate slightly with the plant sprayer.
This will give you a better adhesion. It also shortens the curing time.
![mounting-skirting-boards](https://tec7.ie/wp-content/uploads/2015/07/mounting-skirting-boards.jpg)
STEP
3
Sealing
- Shake the can very carefully.
- Fit the can of Pur7 onto the gun, see the manual for this.
- Fill the hollow spaces not quite completely with PUR7 Pro. Thanks to the low post-expansion you can dose very precisely.
- You can remove uncured PUR foam with Tec7 Cleaner.
- The foam will be cured after 60 minutes.
![mounting-skirting-boards-pur7-2](https://tec7.ie/wp-content/uploads/2015/07/mounting-skirting-boards-pur7-2.jpg)
STEP
4
Finishing
- Trim the PUR foam properly with a sharp knife.
- Degrease the back of the skirting boards with FOAM7.
- Apply a generous quantity of Tec7 to the back of the skirting board and mount it.
- You can remove excess Tecx7 with Tec7 cleaner.
![Tec7_app1](https://tec7.ie/wp-content/uploads/2015/06/Tec7_app1-scaled.jpg)
Find a Local Tec7 Retailer
Would you like to stock our products?
Join over 1800 retailers selling Tec7 products in Ireland and the UK