Mount Skirting Boards
STEP
1
Read the Catalog & Manual
- Always read the information on the packaging
- Need more info? You can find the technical data sheet with the complete manual at the product page.
- Any questions? Our helpdesk is available via email, Facebook or telephone (+353 (1) 6292963 ).
STEP
2
Preparation
- Remove loose particles and dust with brush and/or vacuum cleaner.
- Moisten the substrate slightly with the plant sprayer. This will give you a better adhesion. It also shortens the curing time.
STEP
3
sealing
- Shake the can very carefully.
- Fit the can of PUR 7 Plus onto the gun. See the manual for this.
- Fill the hollow spaces not quite completely with PUR 7 Plus.
- Thanks to the low post-expansion you can dose very precisely.
- You can remove uncured PUR foam with TEC 7 Cleaner.
- After around 60 minutes the foam is cured.
STEP
4
Trimming
- Trim the PUR foam properly with a sharp knife.
STEP
5
Finishing
- Degrease the back of the skirting boards with FOAM 7.
- Apply a generous quantity of TEC 7 to the back of the skirting board and mount it.
- You can remove excess TEC 7 with Tec 7 Cleaner.
Find a Local Tec7 Retailer