Tec7 Cleaner
Tec 7 Cleaner is a safe solvent cleaner for use with Tec 7.
Ideal for finishing adhesive edges, joints and seams
Degreasing and cleaning tools and workshop equipment, both hand tools and machines – does not attack lacquer or synthetic material
Remove adhesive residues and old stickers
Perfect degreasing of ferrous and non-ferrous metals. Will not form an oxide layer with light metals
Removes uncured TEC 7, FLEX 7 and X-TACK 7
Acid-free
Tec7 Cleaner is a general cleaner and degreaser suitable for finishing sealing beads of uncured Tec7 along with the removal of uncured Tec7 from most surfaces including clothes and fabrics. Also suitable for removing silicone based products.
Instructions
Spray TEC 7 Cleaner on the surfaces to be bonded and rub them dry with a clean cloth.
Then allow TEC 7 Cleaner to evaporate completely before bonding the materials. This normally takes between 2 to 5 minutes depending on the amount used.
If necessary, repeat this treatment.
Tips
Always allow Tec 7 Cleaner to work in for a while.
Safe for use on natural stone.
Contains no acids.
Always use a good, straight-edged spatula to smooth off joints.
When using Tec 7 cleaner to finish joints on Natural Stone, please use the product sparingly in order to avoid over diluting the sealant to the extent where the product becomes embedded in the porous substance.
Safety Sheets
Technical information
Would you like to stock our products?
Join over 1800 retailers selling Tec7 products in Ireland and the UK
