Insulate Underground Pipes
STEP
1
Read the Catalogue & Manual
- Free the tube as well as possible of soil, sand and any other materials.
- At regular intervals lay a little wooden block beneath the pipe, so that the bottom of the pipe is also insulated.
- Moisten the pipe with the plant sprayer. This will give you a better adhesion. It also shortens the curing time.
STEP
2
Preparation
- Shake the can very carefully.
- Spray a thin layer of PUR 7 all around the pipe, beginning at the bottom.
STEP
3
Bonding the Skirting
- Apply a generous quantity of TEC 7 to the back of the skirting.
- Press the skirting against the substrate. Position it correctly.
- Apply brief and powerful pressure. It is unnecessary to clamp the skirting in place or exert permanent pressure.
STEP
4
Finishing
- After around 2 hours the foam is cured and it can be covered.
- You can remove uncured PUR foam with PUR 7 Cleaner and Tec 7 Cleaner.
Find a Local Tec7 Retailer
Would you like to stock our products?
Join over 1800 retailers selling Tec7 products in Ireland and the UK
